



Alpine touring ski bindings -
The Xenic Plus 10 alpine touring binding from Fritschi combines lightness, comfort on the ascent, and performance on the descent. Weighing 290 g per binding without the ski brake, it features two climbing aids to adapt to different terrain inclines.
Its DIN release setting from 4 to 10 and safety technologies make it a versatile binding for skiers seeking good downhill efficiency while maintaining a lightweight binding for ascents. The ski brake is included, with several widths available to fit different skis.


- Insert binding with rotating endpiece
- DIN release values: 4 to 10
- Weight: 290 g per binding without ski brake
- Ski brake weight: 45 g
- Ski ramp angle: 2°
- Climbing aids: 7° and 11°
| LEVIER DE PINS À TRANSLATION HORIZONTALE | The front levers slide horizontally to ensure secure retention and limit accidental releases on the descent, without requiring preventive locking. |
| TALONNIÈRE À APPUI EXTRA LARGE | The wide contact surface of the endpiece directly transfers forces to the ski to promote precise and efficient control. |
| COMPENSATION LONGITUDINALE DE 10 MM | The compensation follows the ski’s flex and maintains constant pressure on the system to ensure reliable release at the set values. |
| DÉCLENCHEMENT FRONTAL | In case of a forward fall, pressure from the front of the boot on the release lever allows it to disengage at the stop. |
| RÉGLAGE DIN INDÉPENDANT | Lateral and frontal release values are adjusted separately and continuously to tailor the binding to the skier’s needs. |
| BOÎTIER DE TALONNIÈRE FERMÉ | The closed design limits snow ingress and icing, while reducing maintenance requirements. |
