1. Ski
Arv 88 Madsteez 2026
Freestyle/all-mountain skis -
L'Arv 88 2026 is a freestyle ski from East Armada issu from the range Arv Series.
This range is East's most fun. Armadadesigned for all-mountain and freestyle skiers who have just as much fun in the snowparks as in the Backcountry. The Arv are solid and high performing skis, to always take off higher!
With its 88mm waist, theArv 88 East is one of the most playful skis in the range, designed to ski at full speed and with confidence in the snowpark, then send the most beautiful rotations. These ultra-reactive skis have 2.5 mm thick edges which make them stronger without making them heavier.
The W3DGEWALLsidewalls reinforce the skis to make them more resistant and durable, tricks after tricks, over several seasons. It is built around a poplar core, which is very light but also very stable and Powerful. We've also added ash reinforcements under the bindings, perfect for shooting long straight lines in chopped-up snow or launching into the halp-pipe when the snow is hard.
Lively and dynamic, the Arv 88 will glide on all types of snow, even powder. Naturally, this model is equipped with a double freestyle rocker, so that you can gain speed with confidence in unpredictable snow conditions and make the whole mountain your playground. Its softer flex at the tip and heel gives it a good pop for incredible take-offs and makes it an agile ski with which you can let your creativity run wild.
Thus, the Arw 86 are the ideal skis for confirmed freestylers who are looking for playful and manageable skis that will accompany them throughout the seasons!
| Ski length (cm) | Sidecuts (mm) | Radius (m) |
| 156 | 117 - 88 - 110 | 14.5 |
| 161 | 117 - 88 - 111 | 15 |
| 166 | 118 - 88 - 112 | 15.5 |
| 171 | 119 - 88 - 113 | 16 |
| 176 | 120 - 88 - 114 | 16.5 |
| 181 | 121 - 88 - 115 | 17 |
Materials:
- Poplar Core with ash reinforcements
| AR FREESTYLE ROCKER | The rocker in the tip rocker and the Tail is combined with the traditional camber under the foot to allow you to float on Powder snow and track through variable snow conditions, while maintaining good Adhesion/Grip on hard snow. |
| W3DGEWALL | The w3Dgewall technology is a 3D moulded and injected edge on which we have placed an angle where it comes into contact with the Wooden core, creating a mechanical link in the mould when the ski is manufactured. The result is a stronger, more uniform connection between the edgeband and the Core. Adding material in critical areas increases durability, and with its tapered 3D shape in the tip and tail, the w3Dgewall creates a ski that will withstand even more abuse while delivering optimized edgewear with reduced weight. |
CAUTION if you choose a binding assembly : you have two options:
-Freestyle Recommended" point marked at -2.5cm from the actual centre. A mounting that provides the stability needed to effectively pull off your favourite tricks.
-Factory Recommended" point marked -5cm from the centre of the ski. The ideal set-up for a versatile use between carving on the piste and off-piste.
When you enter the information in the assembly form (when validating the model of fasteners), we will let you specify the option you want in the "Additional information" section. Otherwise, the workshop technicians will automatically comply with the "Factory Recommended" point.
Our Bloch' letter
