Agent 2 2024

Turn radius/Sidecut/weight (per pair):

163 cm: 15 m / 127-96-117 mm / 2660 g
171 cm: 17 m / 127-96-117 mm / 2840 g
177 cm: 18 m / 127-96-117 mm / 2980 g
182 cm: 19 cm / 127-96-117 mm / 3100 g
187 cm: 21 cm / 127-96-117 mm / 3240 g

Shape:

Freeride Flat Heel:
This type of traditional flat tail is designed to offer maximum speed, edge control and stability when turning at full throttle. The light rocker adds a touch of modernity, and this shape will allow you to execute your turns even more easily and will avoid any snagging in fresh snow.

Construction:

Lightweight Karuba core:
Karuba is a very strong, extremely light wood. It's not well known, but it provides a good flex and absorbs vibration without adding weight, which makes it ideal for the core of a touring ski that will perform equally well in ascents and descents.

Sidecuts with elliptic radii:
The sidecuts with elliptic radii consist of a longer radius underfoot and shorter radius on the front and rear parts of the ski. The long radius underfoot allows for faster and easier pivoting, while the shorter radii allow turns to be started more gently. These sidecuts are perfectly suited to a wide range of turn angles and sizes.

2.5 mm XL edges :
One might think that seven tenths of a millimetre doesn't have much of an effect, but when it comes to edges, everything matters. The 2.5 mm edges are 35% thicker than our standard 1.8 mm edges, which are already very sturdy. This addition of steel allows the riders to have a ski that will resist longer to the "stresses" associated with certain techniques.

Carbon strips:
Between 8 and 10 carbon strips are positioned unidirectionally on either side of the core to achieve even greater stability without adding weight. Each carbon strip is woven so as to provide the greatest strength and rigidity in all directions.

Surf Zones:
Surf Zone technology is designed to combine the Rocker with the tapered shape of the tips to ensure that these two key characteristics are in perfect harmony. The Rocker provides lift and helps in the pivoting of the ski, while the Tapered Tip allows the widest part of the ski to be closer to the centre and thus reduce the risk of unwanted gripping by the edge. This technology provides excellent lift and a smooth ride in all conditions.

Full Strength Sidewall:
The full strength sidewall is a construction that applies layers of protective material along the edges of the sidewall, between the edge and the topsheet from above. The edges offer the best possible stability and grip when turning, while protecting the wooden core, edges and cover sheet from possible external impacts and damage.

Tip and tail cap:
On skis equipped with the tip and tail cap construction, Faction place ultra-solid sidewalls at the central part of the ski but wrap the topsheet around the edge of the ski to the tip and tail edges. This protects the ski from impacts and thus improves its durability, while reducing the total weight of the ski, favouring freestyle and ski touring.

Titanal reinforcement plates under the bindings:
When you go for a day's hiking in the backcountry, you must have complete faith in your equipment. The Titanal reinforcement plates are positioned above our lightweight cores to guarantee that the binding screws are completely secure. These monocoque plates are designed to accept either alpine or hiking bindings, thus improving the durability of these ultra-light cores.