Sliding flour -
The
Ideal on fresh , clean snow , applying this powder is easier than applying hard wax because the powder melts more easily and is easier to scrape off. The product's abrasion resistance is the same. The granulometry of the powder has been meticulously tested to obtain the best application result and product performance.
Usage advice:
Apply a good coat of powder to the base, then iron twice to make sure all the powder melts. The temperature of the waxing iron should be 160 degrees and the speed of the iron should be approximately 5 to 7 seconds over the entire length of the ski. After cooling, scrape off the product with a Plexiglas scraper, then brush with a steel or bronze brush, and finally polish with the blue nylon brush.