Zero 2022

Sidecuts: 302-252-302mm in the 155cm model

Sidecut: 8.4 - 7.4 - 8.4m in the frontside et 7.2 - 6.2 - 7.2m at the heel in size 155cm

Flex: 7/10 , medium


Shape:

Asymmetrical Quadratic Sidecut: a clever mix of 3 different turn radii per edge that makes turning easier. The Quadratic Sidecut is adapted to the shape and size of the board, of course!

Twin Hybrid Rocker: Camber between the feet for excellent responsiveness and two rockers at the ends. The two rockers are symmetrical, which allows for very predictable behaviour in both forward and switch positions.

Construction:

Performance™ Core: It is a very strong aspen core, combined with bamboo for its flex and paulownia for its light weight. A perfect blend of strength and lightness.

Double Impact Plates: 2 reinforcement plates superimposed and placed under each of the binding zones. Improves resistance when compressed and reduces the risk of breaking.

Fiberglass -Biaxial Glass : glass fibres placed perpendicular to each other. For boards that are not too rigid and tolerant.

Base: Sintered in Ptex 4000, which is more durable, dense and resistant than an extruded base.


Technology:

Thin Con: all RIDE boards have a refined nose and tail. The aim is to reduce weight, facilitate the use of the ends and promote durability.

Slimewalls®: The board's edges are made of urethane (the same material used to make skateboard wheels) that cushions and smoothes out imperfections in the track, rails or modules. Theoretically unbreakable, these are the most resistant snowboard edges.

RollIn Construction: 3D construction around Slimewall edges to increase rigidity, prevent the topsheet from disintegrating and reduce weight over the board.

Carbon Array 3: this technology allows the energy to be redistributed efficiently to the whole board, regardless of the stance of the bindings. 3 wide carbon strips extend from the binding area to the middle of the opposite rocker. Your heels are connected to your opposite edge (and so are your toes), which makes it much easier to control the board and switch between the edges.

2X4 Inserts