Warpig 2022

Sidecuts: 316-265-306mm in the 151cm model

Sidecut: 5.4 - 6.5 m in the 151cm model

Flex: 6/10, medium


Shape:

Rocker: Flat profile between the feet to pivot instantly and float above the powder, a big front rocker to lift efficiently and enable edge grip, and a shorter rear rocker to maintain consistent manoeuvrability.

Tapered Bi-Radial Sidecut: allows a board with a wide waist to have a normal size nose and tail. This limits the leverage on landings, improves edge grip and stabilises the board.


Construction:

Performance™ Core: It is a very strong aspen core, combined with bamboo for its flex and paulownia for its light weight. A perfect blend of strength and lightness.

Double Impact Plates: 2 reinforcement plates superimposed and placed under each of the binding zones. Improves resistance when compressed and reduces the risk of breaking.

 Hybrid Glass: Triaxial top layer for increased torsional strength and stiffness, ideal for high-speed control.

Base: Sintered in Ptex 4000, which is more durable, dense and resistant than an extruded base.


Technology:

Thin Con: all RIDE boards have a refined nose and tail. The aim is to reduce weight, facilitate the use of the ends and promote durability.

Slimewalls®: The board's edges are made of urethane (the same material used to make skateboard wheels) that cushions and smoothes out imperfections in the track, rails or modules. Theoretically unbreakable, these are the most resistant snowboard edges.

Carbon Array 3: this technology allows the energy to be redistributed efficiently to the whole board, regardless of the stance of the bindings. 3 wide carbon strips extend from the binding area to the middle of the opposite rocker. Your heels are connected to your opposite edge (and so are your toes), which makes it much easier to control the board and switch between the edges.

 Cleave Edge™: Reinforced edges using 50% more steel for increased push and pull resistance.


2X4 Inserts