



The
It is the evolution of the well-known
This binding has been developed with the objective of combining a lightweight form factor with ultimate downhill performance, and ATK has used all its expertise as well as high quality materials. This is THE binding that bridges the gap between classic touring and freeriding.
The
But it is on the way down that this binding will come into its own. Thanks to its wide base, perfect for freetouring skis, its spring-mounted Elastic Response System provides elasticity and an unaltered ski radius. With its increased DIN of 8-14, it offers a very good resistance and allows you to push hard, even in complicated conditions. In addition to the higher DIN adjustment, the
The
In short, the



DIN: 8-14
Adjustable heel support by 25 mm
Weight: 360g per binding
Limited edition: 199 Pairs
Technology:
- Materials: Aluminium, stainless steel, POM
- Magneto® Heel Flaps: considerably increases the comfort and speed of transition from one walking mode to the other: 2 magnetic flaps provide 5 walking positions (flat, +38, + 41, + 48, + 58mm) and can be activated with the end of the pole, reducing the risk of losing balance on steeper slopes.
- Elastic Responsive System®: A spring is inserted between the heel piece and the adjustment screw. If the ski bends due to compression (bumps and jumps), the heel piece can move and return to its position at the end of the impact, without unintentional release.
Sensations: Natural flexion of the ski even in big jumps and compressions
Safety: Better detachment under high stress
Comfort: Reduced loads on the ski/boot/binding system
-Cam Release System®: A special CAME profile is pressed by a pre-tensioned spring towards the heel pins: in the event of a fall, the pins are forced to travel along the CAME profile, which reacts with a precise resistance to the release of the pins.
This guarantees the best downhill performance on the market with a strong reduction of the shoe's torsion compared to any other heel cup.
The result is that the release is extremely precise, and the heel cup is is very easy to step into while remaining light.
- Integrated Crampons Hook®: crampon holder included.
- Easy Entry System: Extremely simple, immediate and secure fitting, even with worn soles.
- Snow Pack Proof: A special front stop design that prevents snow and ice deposits from forming under the mechanism.
- Up-Hill Hardness Variator: This system is an exclusive feature of the R12 and FR14 bindings. A multi-position selector is located between the front lever and the base of the front stop. By changing the position of the selector switch, the hardness of the stopper lock in the uphill mode changes as the pressure on the locking mechanism increases.
The result: it compensates for the wear of the front insert over the years, adjusted to suit the user (softer for lighter skiers, stiffer for stronger ones).
- Freeride Spacer: boot heel support plate to provide lateral release and better skiing comfort.